Build a Lamp Archives - Good Shepherd News - Fastest Growing Religious, Free Speech & Political Content https://goodshepherdmedia.net/tag/build-a-lamp/ Christian, Political, ‎‏‏‎Social & Legal Free Speech News | Ⓒ2024 Good News Media LLC | Shepherd for the Herd! God 1st Programming Sun, 18 May 2025 08:52:28 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://goodshepherdmedia.net/wp-content/uploads/2023/08/Good-Shepherd-News-Logo-150x150.png Build a Lamp Archives - Good Shepherd News - Fastest Growing Religious, Free Speech & Political Content https://goodshepherdmedia.net/tag/build-a-lamp/ 32 32 How To: Make a Decaying Urban Concrete Rebar Lamp https://goodshepherdmedia.net/how-to-make-a-decaying-urban-concrete-rebar-lamp/ Sun, 18 May 2025 07:18:28 +0000 https://goodshepherdmedia.net/?p=20367 Making a Decaying Urban Concrete Rebar Lamp

To create a decaying urban concrete rebar lamp, you’ll need to build a concrete form, embed rebar and wiring, and then create a decayed look by removing the concrete around the rebar and light fixture. This involves using a mold, pouring concrete, allowing it to set, and then chipping away the concrete to reveal the rebar and light. 

Here’s a more detailed breakdown:

1. Preparation and Design:
  • Decide on the lamp’s shape and size:Consider a mold that allows for a decaying look, such as a half-sphere, cylinder, or a more abstract shape. 
  • Create a form:You can use melamine, wood, or other materials to create a mold for the concrete. 
  • Design the rebar structure:Decide how the rebar will be placed to create the desired “decayed” look. 
  • Prepare the light fixture:Ensure the light fixture is waterproof and insulated if it will be directly embedded in the concrete. 
  • Plan the wiring:Route the wiring for the light fixture through PVC pipe or a similar channel to protect it from concrete. 
2. Constructing the Lamp:
  • Set up the form:Place the rebar structure within the mold, ensuring it’s stable and won’t shift during pouring. 
  • Embed the light fixture:Wrap the light fixture in a plastic bag or use another method to protect it from concrete and wet sand. 
  • Pour the concrete:Mix concrete according to instructions and pour it into the form, ensuring it fills the mold completely and surrounds the rebar and light fixture. 
  • Allow the concrete to cure:Let the concrete set according to the manufacturer’s instructions. 
3. Creating the Decayed Look:
  • Remove the form: Once the concrete is fully cured, carefully remove the form.
  • Chisel away concrete: Use a chisel, hammer, or other tools to carefully remove the concrete surrounding the rebar and light fixture to create the desired “decayed” look. 
  • Clean up and finish: Brush off any loose debris and sand any rough edges. Consider adding a patina or other finish to enhance the “decayed” look. 
4. Electrical Connections:
  • Wire the lamp: Connect the wiring to the light fixture, ensuring it’s securely fastened and insulated.
  • Create a power source: Decide on a plug-in cord or a hard-wired connection for the lamp.
  • Test the lamp: Ensure the lamp works correctly before final installation. 
Materials You’ll Need:
  • Concrete (mix with cement, sand, and gravel)
  • Rebar
  • Light fixture (LED bulb, socket)
  • Electrical wiring and connectors
  • PVC pipe or similar for wiring protection
  • Mold (melamine, wood, etc.)
  • Tools: chisel, hammer, sander, etc. 
Tips for Success:
  • Practice with small batches of concrete: before pouring into the final form. 
  • Use wet sand to create voids: for the “decayed” look instead of chiseling. 
  • Consider using a patina or other finish: to enhance the aged look. 
  • Ensure all electrical connections are secure and insulated . 
  • Take your time and be patient: with the chipping and finishing process. 

]]>